定制精密管的基地

山东大鼎钢管厂After the steel pipe is sizing, enter the cooling tower and spray water to cool down. After cooling, the steel tube is straightened. After straightening, the steel pipe is sent to the metal flaw detector (or water pressure test) through the conveyor belt for internal inspection. If cracks occur inside the steel tube, bubbles will be found. After quality inspection, the steel pipe should be selected strictly by hand. After the quality inspection of steel pipe, paint quantity, specification, production batch number, etc.山东大鼎钢管厂精密无缝钢管均执行标准：GB3639-2000冷轧精密无缝钢管GB/T8162-2008结构用无缝管、GB/T8163-2008流体精密无缝管、GB/T3087-2008低中压锅炉精密管、GB/T5310-2008高压锅炉无缝管、GB/T17396-1999液压支柱精密钢管、GB/T6479-2000化肥专用合金管、GB/T3088-1982汽车半轴套管用无缝钢管、GB/T3093-2002柴油机用高压油管、GB/T8713-1988液压和气动缸筒用精密无缝钢管。浆纱机将锥形钻头冲入钢胚中，形成钢管。钢管的内径由钻头直径的长短决定。

山东大鼎金属材料有限公司Precision seamless steel pipe (cold-drawn and cold-rolled) has high precision, no oxidation coating inside and outside the pipe, smooth and smooth surface, uniform wall thickness, high precision, small diameter of thin-walled tube to ensure that the error of the outside diameter of the tube in the inner and outer surface of the pipe presents varying degrees and quantities of corrugated ring marks, some are continuous, some are intermittent, may be the entire circle, there are. Not the whole circle. poor quality of pickling and lubrication, increase and change of friction during drawing, mechanical properties of steel pipe in length direction after heat treatment are not consistent, mandrel length and fineness are too large, and the position of mandrel before.

山东大鼎钢管厂拥有台大中型冷拔机、两台辊底热处理炉、台大中型穿孔机和台热轧钢管机组三套先进的生产设备和成熟的生产工艺。公司拥有现代化的科研中心，拥有强大的性能测试、工艺性能测试、涡流测试、超声波测试、水力测试、金相测试、高精度碳硫分析等一整套测试方法，并拥有一批高素质的技术人员和检查员。硬度试验是根据规定的条件将硬质压头缓慢压入试样表面，然后测试压痕深度或尺寸，从而确定材料的硬度。